Повнотекстовий пошук
Пошуковий запит: (<.>A=Zhbanova O$<.>) |
Загальна кількість знайдених документів : 3
Представлено документи з 1 до 3
|
1. |
Zhbanova O. M. Effect of electrical action during crystallization on physical and mechanical properties of steel 110H13L [Електронний ресурс] / O. M. Zhbanova, L. N. Saithareyev, G. A. Bialik // Научный вестник Донбасской государственной машиностроительной академии. - 2017. - № 1. - С. 11-14. - Режим доступу: http://nbuv.gov.ua/UJRN/nvdgma_2017_1_4
| 2. |
Skidin I. E. Alternative technology to manufacture bimetallic products by using self-propagating high temperature synthesis [Електронний ресурс] / I. E. Skidin, V. T. Kalinin, V. V. Tkach, L. N. Saitkhareiev, O. M. Zhbanova // Journal of engineering sciences. - 2017. - Vol. 4, Iss. 2. - С. B7-B10. - Режим доступу: http://nbuv.gov.ua/UJRN/VSU_tekh_2017_4_2_4 Electric welding is usually used for surfacing metal products. This process may be laborious and timeconsuming, which at the same time excludes welding jointing throughout the product surface. The productivity of powder tape surfacing is pretty low, up to 2,7 kg / h, with a melting rate of 13 - 15 min / h. The use of the selfpropagating high-temperature synthesis for producing a liquid thermite alloy aimed at further surfacing throughout the metal surface of a detail can provide a cost-effective and viable alternative technology for manufacturing bimetallic products.
| 3. |
Zhbanova O. M. Influence effect of electric action on the micro structure of steel in crystallization [Електронний ресурс] / O. M. Zhbanova // Journal of engineering sciences. - 2017. - Vol. 4, Iss. 2. - С. F5-F7. - Режим доступу: http://nbuv.gov.ua/UJRN/VSU_tekh_2017_4_2_9 The dependence of physical and mechanical properties of manganese steel grade 110H13L on the effect of electrical activity during crystallization of the casting is considered. Treatment of the melt by electric current increases the speed of dissolution of metallic impurities and other components in the melt many times, providing not only finely crystalline structure, but also improving the homogeneity of metal casting. Improvement of mechanical properties is a consequence of crushing those which constitute microstructure. Processing by electric current does a beneficial effect on the process of crystallization of metal melts during casting, which significantly improves the structure of the ingot and its mechanical properties.
|
|
|